Elite-screens Manual SRM Pro Series User Manual download pdf (Page 3)

Rev. 010710-JA 2

SCREEN OPERATION

Note: Always pull the screen down or let it up in a 90-degree vertical angle. Do not allow the screen to touch the

screen case when the screen goes up or comes down to avoid damaging the screen material.

1. Pull the screen down from the lanyard or from the handle only in a 90-degree angle. Do not attempt to pull the

screen down by the surface or touch the screen, as it will damage the screen and void the warranty.

Note: An internal auto-lock mechanism system will cause the screen to stop and lock on the position at

intervals.

2. If you want to the screen to retract back, simply pull the screen down more than 2 inches and retract the

screen back releasing it up gently. The screen is equipped with a SLOW RETRACT MECHANISM which

allows the screen to slowly retract without the need to hold on to the handle or lanyard. Simply release the

handle and the screen will retract by itself.

Note: Always release at a 90-degree angle. If ever the screen feels stuck, keep in mind that the screen’s

mechanism is new and needs to be brought up/down a few times to loosen up. If this happens, carefully

with a little force, yank the screen straight down to unlock the screen.

Note: Improperly bringing the screen up/down will damage the screen material or rolling system.

1 2 3 4 5

No comments

Elite-screens Manual SRM Pro Series User Manual Page 3