Elite Screens Manual Series User's Guide download pdf (Page 6)

OPERATION

Remote Control System And Wiring:

Line Switch: Manual 3-way wall switch for your new Elite Screen with wireless IR and RF

remote.

1. This is the control box connection to your new Elite Screen. First insert the 3-prong

cable (Pins) to the proper input of the control box. Then connect the cord with the 4-

prong cable (Pins) into the proper output of the control box. The other end of the 4-

prong cable (Pins) will need to go to the screen’s case. Please see example diagram.

This is the IR “eye” sensor for the IR remote

You will have to aim directly at it for proper operation.

Rev 1.3

Keyhole for flush mounting

The 4-prong wire connects

the control box to the screen.

The 3-prong wire will connect from

the control box to the power cord.

The screen has a standard 110-volt

power outlet.

Note:

Always press the “stop” button first, then press “up” or “down” when raising or lowering

the screen.

Elite Screens Technician for more detail to avoid damaging the screen and voiding your warrant

1 2 3 4 5 6 7 8 9 10

No comments

Elite Screens Manual Series User's Guide Page 6